Super-Latex PET Printable Film (DTF) is a product launched by Transfer2paper in July 2020. It can directly use latex ink and hot melt adhesive powder to achieve large-scale fast heat transfer production without cutting, and realize low-cost high-end technology applications. It can be highly efficient Large-scale production, reduced labor costs, simple operation, and high-quality effects. We believe that Eco-solvent products will gradually be replaced by latex. T-shirt transfer paper will become a personal and personalized product, and is no longer suitable for industrial-scale production. It Will be the trend of this century.
1.The surface of the PET is coated with a matte surface release agent and it's smooth, the coating is uniform, without wrinkles, tears, particles, bubbles and other defects.
2.Strong ink absorption capacity, thick ink absorption layer, especially for water-based inks, coating inks and textile industry inks.
3.It's very suitable for printing Small text（2-3mm） than heat transfer vinyl
4.Excellent physical and mechanical properties, low shrinkage, high temperature resistance, small thickness tolerance, good matte, low heat shrinkage, good release.
5.Much more easier to use than laser A+B transfer paper
Suitable for thermal transfer printing factory, heat transfer factory, all kinds of clothing transfer trademarks, transfer patterns, washing labels and other printing.
Conventional: 60cmx100m/roll / A3 or A4 sheets
Special rules: width 60cm, the number of meters can be customized
Applicable ink: water-based ink, paint ink
Whatsapp: (+86) 17798509603
Keep yourself posted by following us on social media
Double-head printing: after finish color printing, it is recommended that the white ink circulation to ensure the smoothness of the ink.
-pattern directly digital printing on the film
-sprinkle hot melt powder
-dry melt powder
At present, most inkjet printers are available except for desktop printers
Pressing conditions: 150-170℃, time 8-15 seconds
Tear off method: cold tear
Process of heat press
While using the heat press machine, set the temperature at 165°C for 15 seconds, the pressure is 5-8kg.
Put the clothes flat on the bottom of the heat press machine and iron it for about 5 seconds.
Cut the printed film from the printer
Heat press machine press for 15 seconds at 165°C.
Remove the transparent PET film and hot stamping is completed.
Matters needing attention
Storage environment: Relative humidity 35-65%, temperature 10-30°C, sealed indoor storage, avoid direct sunlight, shelf life 1 year.
Precautions for washing: We recommend washing the transferred T-shirts separately with ordinary detergent and cold water. Do not mix with other clothes at the same time. Do not dry clean or bleach. Please do not rub the transfer parts. Dry them immediately after washing. Or use a dryer to dry. After washing, if the image shows signs of shedding, you can cover the image with greaseproof paper and iron it again. Do not iron the transfer part directly with an iron.